You are here : design-reuse-china.com  > IoT Design Solutions  > Wireless Solutions
Download Datasheet        Request More Info
All Silicon IP


The iEB110 is a complete Bluetooth Low Energy v5.2 solution, including RF, controller software and Bluetooth Low Energy host stack, enabling product developer to create small form-factor, low power audio devices such as earbuds and hearing aids. iEB110 supports advanced Bluetooth 5 features such as Angle of Arrival/Angle of Departure (AoA / AoD) allowing sub 1m location and tracking accuracy, LE long-range operation for extended indoor and outdoor coverage, and LE-2M PHY for higher throughput and reduced power consumption. With industry leading RF performance, iEB110 delivers robust connectivity while extending the system battery life.


  • Silicon ready design
  • Industry leading sensitivity
  • Low power consumption
  • Easy integration into an SoC


  • Internet of Things
  • Wearables
  • Earbuds and Hearing aid devices
  • Connected consumer products


  • Complete Bluetooth Low Energy v5.2 solution
  • Out-of-box support for popular opensource stacks, such as Zephyr, BlueZ and Codrio
  • Typical receive current consumption 4.5 mA
  • Typical deep sleep current <1uA
  • Wide range of reference crystal frequencies supported (16 – 40MHz)
  • Designed for TSMC 40LP process
  • General Features
    • Complies with Bluetooth Low Energy v5.2 specification:
    • LE Isochronous Channel
    • Enhanced Attribute (EATT)
    • LE power control
    • Supports Angle of Arrival and Angle of Departure (AoA/AoD)
    • Suppors 2M PHY
    • Supports LE Long Range
    • Multiple simultaneous BLE connections
    • No external trimming required in production except for XO frequency trimming
    • Wi-Fi coexistence through PTA (Packet Traffic Arbiter) interface
    • 1.76 mm2 post layout die area, including RF, Logic and Memory
    • Low gate count/memory for the link layer/baseband
  • Interfaces
    • Single pin RF antenna interface
    • 32-bit AXI slave port provides host access to system memory
    • Interrupt driven messaging interface
  • Software
    • Complete v5.2 protocol stack, Link Layer and profiles
    • Full support for Zephyr, BlueZ and Cordio.
    • Firmware can be placed in ROM for low-power operation
    • Software patch support for futures feature enhancements
  • RF Features
    • Complete 2.4 GHz RF including PA, LNA
    • Bluetooth Low Energy Sensitivity:
    • 125 Kbps: -104 dBm
    • 500 Kbps: -100 dBm
    • 1 Mbps: -98 dBm
    • 2 Mbps: -96 dBm
    • Tx Output Power up to +6 dBm
    • Power efficient AGC
    • Integrated Tx/Rx switch for RF
  • Power Management
    • LDO regulators and DCDC converter
    • Always On (AON) block
    • Sleep Controller, supporting external 32 KHz clock
    • Multiple Power Domains
  • Package
  • Support for QFN packages








© 2018 Design And Reuse


不得复制,重发, 转载或以其他方式使用。