www.design-reuse-china.com
141 "IoT Design Solutions" Solutions

1
Adaptive Body-Bias Subsystem enabling Process, Voltage & Temperature compensation to leverage FDSOI body-biasing capabilities
* All-in-one IP including body-bias voltage regulator, low power sensors and control loop

2
CEVA SenslinQ - Hardware and software platform for contextually aware IoT devices
SenslinQ is a unique hardware and software platform for linking various sensor processing elements and present them to the Host processor OS or user application.

3
CEVA SensPro - Industrys First High Performance Sensor Hub DSP Architecture
SensProTM is the industry's first high performance sensor hub DSP for processing and fusing data from multiple sensors including camera, Radar, LiDar, Time-of-Flight, microphones and inertial measurement units.

4
CEVA-Dragonfly NB2 Full eNB-IoT IP solution
CEVA has designed a complete eNB-IoT IP solution that can serve a wide range of applications. The CEVA-Dragonfly NB2 pre-integrates together a CEVA-X1 processor, an optimized RF Transceiver, baseband, and a protocol stack to offer a complete Release 14 Cat-NB2 modem IP solution that reduces time-to-market and lowers entry barriers

5
CEVA-X1 Multi-purpose IoT Processor
The CEVA-X1 is a multi-purpose combined DSP and control processor aimed at multi-mode IoT hub devices for handling cellular, LPWA, short range communication, positioning, always-on sensor-fusion, and speech processing concurrently.

6
CEVA-XC12 Multi-gigabit SDR Processor
The CEVA-XC12 is the first DSP architecture that offers the raw performance and power efficiency required for multi-gigabit class modems. This flexible architecture with multiple options enables it to be customized, configured, and scaled to address applications such as smartphones and other terminals, advanced and centralized access points, small cells, macro cells and cloud RAN (C-RAN).

7
CEVA-XC4500 Vector processor
The CEVA-XC4500 DSP vector processor is the fourth generation of the widely licensed CEVA-XC architecture. Optimized for advanced communication applications, and especially high-performance wireless infrastructure equipment, it features a combination of VLIW and vector engines that enhance typical DSP capabilities with advanced scalar and floating-point vector processing.

8
CEVA-XC5 Communication Processor
Based upon the industry’s most widely adopted CEVA-XC323 Vector DSP architecture, the CEVA-XC5 DSP vector processor offers the performance, area savings, and power efficiency that system designers demand when implementing a broad range of IoT and M2M communication standards.

9
Display unit and graphics accelerator for IoT and wearables
Vector graphics | Fill/Clear | BLT | Blend | Scale | Any Angle Rotation | Perspective Transformation | Programmable Shader | ARGB8, RGB565, A8 and other optional formats | Color Conversion | On-the-fly compression

10
eSecure module for SoC security for IoT
Secure Boot | Firmware update in the field | Secure key storage | Cryptography algorithms off-loading

11
FT 6050 Smart Transceiver SoC
The FT 6050 Smart Transceiver SoC is a key product in Adesto's embedded IoT platform – the most comprehensive and open control networking platform for the Industrial IoT.

12
GC Nano Ultra-MCU/MPU OpenGL ES 2.0 GPU for Wearables and IoT
GCNano is a complete OpenGL ES 2.0 GPU architected for MCU / MPU systems with limited power, memory, and bandwidth configurations.

13
GCNano Ultra 3-MCU/MPU OpenGL ES 3.0 GPU for Wearables and IoT
OpenGL ES 3.0/2.0 / 1.1 | OpenVG 1.1 | 720p @ > 60FPS (UI Resolution and Performance) | Up to 400M Pixels/sec | Up to 40M Triangles/sec | Up to 200M Vertices/sec | 1.6 mm2 (28nm)

14
GCNano-MCU/MPU OpenGL ES 2.0 GPU for Wearables and IoT
This is a complete OpenGL ES 2.0 GPU architected for MCU / MPU systems with limited power, memory, and bandwidth configurations.

15
i.MX6 based IoT Gateway Reference Board
IOT gateway reference solution enables companies to seamlessly connect industrial infrastructure devices and secure data flow between devices and the cloud. With i.mx6 processor, it offers comprehensive security features include cryptographic accelerators, high-assurance boot and tamper protection. It is equipped with standard communication and wirelesss interfaces like WiFi, Bluetooth, Zigbee (optional)

16
i.MX6 based Tablet design
The i.MX6 MPB (Multi-Purpose Board) Reference Design comprises hardware and software components that provide an Customizable Cost Effective integrated platform for building Tablet, Set-top box, IOT gateway, Auto infotainment etc.

17
I3C Sensor Subsystem
The I3C Sensor Subsystem is an AMBA® based system that is useful in building low power SOCs needing sensor interfaces through I3C.

18
IPsec Engine
On OSI layer 3 (network layer), IPsec is the transport security protocol of choice. The BA454 is a very scalable engine implementing the IPsec standard for high throughput applications.

19
MotionEngine
Versatile and powerful sensor processing software system hardened through 15 years of development and use in over 100 million consumer electronics devices

20
Sensor fusion solutions for augmented and virtual reality, robotics, motion controllers, and IoT
Hillcrest's advanced sensor fusion technology transforms human and machine movement into high quality, application-ready information that enables developers and manufacturers to create everyday products that work with precision.

21
SmartEdge
SmartEdge Platform delivers complete integration into one chip of all the key functions required for edge computing

22
Verisilicon IoT Platform
IoT forms a vast network of devices that sense, communicate or interact with each other. These connected devices are found in various end markets like industrial, consumer, automotive and home.

23
Bluetooth Low Energy v5.2 IP in TSMC40LP
The iEB110 is a complete Bluetooth Low Energy v5.2 solution, including RF, controller software and Bluetooth Low Energy host stack,

24
CAST Geon Secure Execution Processor for IoT
The Geon™ Secure Execution Processor is a low-power, 32-bit processor IP core with built-in protection of sensitive code and data. It uses two or more cryptographically separated execution contexts for a high degree of security during code execution and for data storage and transfer to and from the processor.

25
Creator Ci40
Creator Ci40 is available as a stand-alone development board or as part of an IoT development kit designed to allow fast prototyping of IoT products.

26
CryptoManager IoT Device Management
The CryptoManager IoT Device Management is a turnkey security service that provides IoT OEMs and service providers an easy to use security solution from device-to-cloud.

27
Ensigma CRF4600 dual-band IEEE 802.11ac/p 1x1 (2.4GHz)/ 2x2 (5GHz) and Bluetooth 5.0 radio IP in TSMC 65nm LP
High-performance and low power connectivity

28
Ensigma GNSS IP
Designed specifically for mobile battery-operated devices, Ensigma GNSS IP solutions support GPS, GLONASS, BeiDou and Galileo GNSS and a range of SBAS, providing high performance without compromising battery life.

29
In-Chip Monitoring Subsystem IP for IoT
Within the Moortec embedded in-chip monitoring subsystem fabric the Process Monitor provides the means for advanced node Integrated Circuit (IC) developers to detect the process variation of core digital MOS devices.

30
Provisioning Platform
Inside Secure Provisioning Platform allows production line certificate generation and tracking to ensure the integrity of the manufacturing and licensing process.

31
Secure True Random Number Generators for IoT
True Random Number Generators (TRNGs) are typically deployed in semiconductors for secure data communications, secure electronic transactions, and secure data storage.

32
ACCUREF - Low Power Voltage and Current Reference Circuit, 0.3% Accuracy, 90 dB PSR in TSMC C130BCD
ACCUREF™ voltage and current reference IP cores support a broad range of industry applications with improved efficiency and remarkable area savings overall.

33
BLE 5.0, BT Dual Mode, WiFi, ZigBee, NFC, GSM, LTE, RISC CPU for IoT applications
Silicon Proven | High Volume Production SoC Proven | SoC Design Data Base | System on Chip (RF+Analog+Digital+SW) | All Wireless connectivity standards supported

34
Capless 150mA Power Quencher LDO voltage regulator with ultra low quiescent current (<1uA) for IoT
150mA linear voltage regulator | Operation with and without an external capacitor | 1.6V to 5.5V input power supply | Output voltage ranging from 0.5V to 5.0V

35
Capless 250mA Power Quencher LDO voltage regulator with ultra low quiescent current (<15uA) for IoT
250mA linear voltage regulator | Operation with and without an external capacitor | 1.6V to 5.5V input power supply | Output voltage ranging from 0.5V to 5.0V

36
FLEXSUPPLY : Switched Capacitor Regulated Voltage Doubler IP
With their low power consumption and integrated, modular design, our family of buck/boost switched capacitor regulated voltage doubler IP cores support a broad range of industry applications with improved efficiency and flexibility.

37
IoT Edge SoC Platform
An edge device in the IoT context is a secure, remotely manageable asset connected to the cloud

38
IoT Gateway SoC Platform
IoT Gateway is a critical component in an IoT system and it connects multiple and in many cases, heterogeneous edge devices to the cloud. Among its primary functions are, edge device connectivity, protocol translation, data filtering & analysis, security, device management etc.

39
L&T IoT Platform
L&T Technology Services collaborates with both hardware as well as software IoT platform vendors. Being platform agnostic allows L&T Technology Services to recommend the right platform to customers and also enable IoT platform providers to rapidly adapt to the industry s needs.

40
LTE NB IoT/Cat M UE Low Power RF Transceiver IP
70xx is a range of ultra‐low power LTE Cat M/NB-IoT RF Transceiver IPs optimized for IoT and M2M applications.

 | 
 Previous Page
 | 1 | 2 | 3 | 4 | 
Next Page 
 | 
 Back

业务合作

访问我们的合作伙伴页面了解更多信息

广告发布

访问我们的广告选项

添加产品

供应商免费录入产品信息

© 2018 Design And Reuse

版权所有

本网站的任何部分未经Design&Reuse许可,
不得复制,重发, 转载或以其他方式使用。