www.design-reuse-china.com
125 "Automotive, Avionics and High safety" Solutions

1
ACS-AIP-DPHY-40GF-Auto - MIPI D-PHY in GlobalFoundries 40nm Automotive Process
Arasan delivers you a MIPI D-PHY in the process node and lane configuration you need, conforming to your specific design constraints, with a complete GDSII that includes analog BIST and routing to your pads.

2
ACS-AIP-DPHY-40LP-RA - MIPI D-PHY TSMC 40LP Renesas- Automotive Grade
Arasan delivers you a MIPI D-PHY in the process node and lane configuration you need, conforming to your specific design constraints, with a complete GDSII that includes analog BIST and routing to your pads.

3
Arm Cortex-A65AE
The First Multithreaded DynamIQ CPU with Split-Lock

4
Cadence Automotive Ethernet MAC IP for high-performance in-vehicle networks
The Cadence® Controller IP for Automotive Ethernet IP for high-speed Ethernet communication links between ADAS, infotainment, and other ECUs leveraging time-sensitive Ethernet IP.

5
CAN 2.0B Bus Controller IP Core
The Controller Area Network (CAN) controller IP that implements the CAN2.0A, CAN2.0B as well as newer high performance Non ISO CAN-FD protocols.

6
CAN Controller
The CAN Controller is a synthesizable IP block providing Controller Area Network (CAN) functionality compliant with the CAN Specification Revision 2.0 Part B.

7
CAN FD Bus Controller
The Controller Area Network (CAN) controller IP that implements the CAN2.0A, CAN2.0B as well as newer high performance Non ISO CAN-FD protocols.

8
Cortex-R52 Processor
This processor has been designed specifically to address the needs of functional safety. It has been developed within a process to fulfil IEC 61508 SIL 3 and ISO 26262 ASIL D requirements enabling it to be readily adopted for highly dependable systems where safety is critical.

9
Embedded Vivante GPU, Vision, and IoT cores
Our impressive range of scalable, licensable Vivante GPU cores addresses the rapidly advancing expectations of the semiconductor marketplace from small form-factor IoT type MCUs with low power consumption to powerful SoCs perfect for automotive and high end multimedia applications.

10
FlexCAN Controller
The FlexCAN controller is a highly configurable, synthesizable core implementing the CAN protocol (ISO 11898-1),

11
FlexCAN with CAN-FD
The FlexCAN with CAN-FDis a highly configurable, synthesizable core implementing the CAN protocol (ISO 11898-1)

12
LPDDR4 Memory Model Verification IP for Automotive
This Cadence® Memory Model Verification IP (VIP) supports the JEDEC® Low Power Memory Device, LPDDR4 standard.

13
Mali Camera
Mali-C71 is the first product in the Mali Camera series of Image Signal Processors (ISP) from Arm s imaging & Vision Group.

14
MultiCAN Controller
Since its introduction in the mid-1980s, the Controller Area Network (CAN) has become a standard network protocol for automotive applications.

15
A825-CAN ARINC 825 Avionics CAN Controller
Implements a CAN 2.0 bus controller and provides an application layer that conforms to the ARINC 825 Avionics bus specification.

16
CAN 2.0 & CAN FD Bus Controller Core
Implements a CAN protocol bus controller that performs serial communication according to CAN 2.0, and CAN FD specifications.

17
CAN 2.0 & CAN FD Reference Design
The CANFD-RD is a complete reference design for a CAN node subsystem based on the CAN-CTRL CAN 2.0 & CAN FD Bus Controller IP Core.

18
IEEE 802.1AS Hardware Protocol Stack
The IEEE802_1AS is a complete IEEE 802.1AS hardware stack that enables the simple and rapid development of time-aware nodes for AVB/TSN networks such as automotive Ethernet.

19
LLEMAC-1G - Low-Latency 10/100/1000 Ethernet MAC
The LLEMAC-1G implements an Ethernet Media Access Controller (MAC) compatible with the 10/100 Mbps IEEE 802.3 and 1Gbps IEEE 802.3-2002 specifications.

20
Low-Power, Low-Latency HDR/WDR Image Processor Core
The WDR core implements an efficient, flexible, low-power and low-latency High Dynamic Range (HDR) and Wide Dynamic Range (WDR) image processor that produces clear and sharp images under any lighting conditions.

21
MIL-STD-1553 Bus Controller, Remote Terminal, and Monitor Terminal Core
The 1553-BC/RT/MT IP core implements a serial link controller enabling the development of Bus Controllers (BC), Remote Terminals (RT), and Monitor Terminals (MT) compliant with the Department of Defense MIL-STD-1553B standard.

22
Multichannel ARINC 429 Receiver/Transmitter
The A429-RxTx IP core is a multichannel transmitter (Tx) and receiver (Rx) compliant to the ARINC 429 standard.

23
PowerVR Automotive
IP solutions designed and packaged for automotive : GPUs and dedicated AI accelerators are vital to the success of the next generation automotive industry, underpinning the infotainment, digital cockpit and advanced driver assistance systems (ADAS) that are becoming standard features of the car.

24
SENT/SAE J2716 Controller Core
The CSENT core implements a controller for the Single Edge Nibble Transmission (SENT) protocol.

25
TSN_CTRL
The TSN_CTRL implements a configurable subsystem meant to ease the implementation of endpoints for networks complying to the Time Sensitive Networking (TSN) standards.

26
XS GPU Familly - PowerVR for Automotive
>The XS family of GPUs, part of our PowerVR Automotive offerings, are a new class of cores for ADAS acceleration and safety-critical graphics workloads – the industry's first ISO 26262-capable GPU IP.

27
10/100/1000/2500 Ethernet MAC
Comcores 10/100/1000/2500 Ethernet MAC IP solution is a low latency and low size solution that complies to IEEE 802.3 while keeping implementation complexity at a minimum.

28
10G/25G Ethernet MAC
Comcores 10G/25G Ethernet MAC provides a complete IEEE 802.3 Ethernet Layer 2 solution.

29
10G/25G Ethernet TSN MAC
Comcores 10G/25G TSN MAC provides a complete IEEE 802.3 Ethernet Layer 2 solution with support for key TSN features including 802.1Qbu Preemption and 802.3br Interspersing Express Traffic.

30
10M/100M/1G/2.5G Ethernet TSN MAC
Comcores 10M/100M/1G/2.5G TSN MAC provides a complete IEEE 802.3 Ethernet Layer 2 solution with support for key TSN features including 802.1Qbu Preemption, 802.3br Interspersing Express Traffic, 802.1AS Timing and Synchronization and 802.1Qbv Enhancements for Scheduled Traffic.

31
CAN 2.0 Controller with DMA
The GRCAN core is a CAN controller with an AHB DMA backend. The APB bus is used for configuration, control and status handling and the AHB bus is used for retrieving and storing CAN messages in memory external to the CAN controller.

32
CAN-FD controller compatible with both CAN 2.0B and CAN-FD
GRCANFD is a VHDL IP core implementing a CAN-FD controller compatible with both CAN 2.0B and CAN-FD. It consists of an internal CAN-FD codec and a top layer handling the configuration and control of the IP.

33
DAB Receiver Kit
The DAB Receiver Kit from Fraunhofer IIS is a fully validated DAB/DAB+/T-DMB solution for the automotive and consumer market. This innovative software radio approach allows terminal manufacturers to e...

34
DRM Receiver Kit
The DRM Receiver Kit from Fraunhofer IIS is a fully validated DRM solution for the automotive and consumer market. This innovative software radio approach allows terminal manufacturers to efficiently ...

35
Fraunhofer Symphoria for automotive
Fraunhofer Symphoria ® is a universal solution for rendering outstanding stereo and 3D surround sound in automotive environments. The intelligent post processing technology virtually opens up the ...

36
GR716 - LEON3FT Microcontroller
The GR716 features a fault-tolerant LEON3 SPARC V8 processor, communication interfaces and on-chip ADC, DAC, Power-on-Reset, Oscillator, Brown-out detection, LVDS transceivers, regulators to support f...

37
LEON3 Processor
The LEON3 is a synthesisable VHDL model of a 32-bit processor compliant with the SPARC V8 architecture. The model is highly configurable, and particularly suitable for system-on-a-chip (SOC) designs. The full source code is available under the GNU GPL license, allowing free and unlimited use for research and education.

38
Philips SJA1000 compatible CAN core
The CAN_OC core is a Philips SJA1000 compatible CAN core with a AHB slave backend.

39
Standalone controller for the Controller Area Network
The DCAN is a standalone controller for the Controller Area Network (CAN), which is commonly used in automotive and industrial applications.

40
10G PHY for PCIe 3.0 in TSMC (16nm) for Automotive

The multi-lane DesignWare Multi-Protocol 10G PHY IP is part of Synopsys' high-performance multi-rate transceiver portfolio, meeting the growing needs for low-power consumption and low latency i...


 | 
 Previous Page
 | 1 | 2 | 3 | 4 | 
Next Page 
 | 
 Back

业务合作

访问我们的合作伙伴页面了解更多信息

广告发布

访问我们的广告选项

添加产品

供应商免费录入产品信息

© 2018 Design And Reuse

版权所有

本网站的任何部分未经Design&Reuse许可,
不得复制,重发, 转载或以其他方式使用。