www.design-reuse-china.com
13 "Interface Controller & PHY->MIPI" SoCs

1
GLOBALFOUNDRIES 22nm FDSOI MIPI C/D Combo PHY RX
VeriSilicon Microelectronics (Shanghai) Co., Ltd.

2
GLOBALFOUNDRIES 22nm FDSOI MIPI C/D Combo PHY TX
VeriSilicon Microelectronics (Shanghai) Co., Ltd.

3
GLOBALFOUNDRIES 22nm FDSOI MIPI DPHY V1.2 RX
VeriSilicon Microelectronics (Shanghai) Co., Ltd.

4
GLOBALFOUNDRIES 22nm FDX MIPI DPHY Master V1.2
This is a DPHY IP compliant to the “MIPI Alliance Spec for D-PHY v1.2”, which consists of 1-Clock and 4-Data lanes. It can support Master side. Each lane supports 2.5Gbps in High-Speed mode and 10Mbps...

5
MIPI CSI-2 SLAVE D-PHY IP
The MXL-DPHY-CSI2-RX is a high-frequency low-power, low-cost, source-synchronous, Physical Layer supporting the MIPI Alliance Specification for D-PHY v1.2. The IP is configured as a MIPI Slave optimiz...

6
MIPI D-PHY CSI-2 TX in GlobalFoundries 22FDX
The MXL-DPHY-CSI2-TX is a high-frequency low-power, low-cost, source synchronous, Physical Layer supporting the MIPI Alliance Specification for D-PHY v2.1, which is backward compatible with MIPI Speci...

7
MIPI D-PHY DSI TX IP in Samsung 28FDSOI
The MXL-DPHY-DSI-TX+ is a high-frequency low-power, source-synchronous, physical layer supporting the MIPI Alliance Specification for D-PHY v2.1, which is backward compatible with MIPI Specification f...

8
MIPI D-PHY Receiver
The MXL-DPHY-CSI2-RX is a high- frequency low-power, low-cost, source-synchronous, Physical Layer supporting the MIPI® Alliance Standard for D-PHY. The IP is configured as a MIPI slave optimized for ...

9
MIPI D-PHY Transmitter in Samsung 28nm FDSOI
The MXL-DPHY-DSI-TX is a high-frequency low-power, low-cost, source-synchronous, Physical Layer supporting the MIPI® Alliance Standard for D-PHY. The IP can be configured as a MIPI Master optimized ...

10
MIPI D-PHY Universal IP in Samsung 28FDSOI
The MXL-DPHY-UNIV is a high-frequency low-power, low-cost, source-synchronous, physical Layer. The PHY can be configured as a MIPI Master or MIPI Slave supporting camera interface CSI-2 v1.2 and displ...

11
Samsung 28nm FDSOI MIPI DPHY V1.1
VeriSilicon Microelectronics (Shanghai) Co., Ltd.

12
MIPI D-PHY Combo PHY & Controller (support combo TTL, LVDS, HiSPI)
INNOSILICON MIPI D-PHY is V1.2 spec compliant and can combine either a high-speed transmitter or receiver with a low speed transceiver to support ULP, LP and HS operation. The D-PHY uses the standard ...

13
MIPI D-PHY Transmitter/Receiver for DSI/CSI-2 Samsung 28nm FD-SOI
The Renesas MIPI D-PHY Transmitter/Receiver is useful 4 Data Channel transmitter/receiver hard macro for DSI/CSI-2 of Samsung 28nm FD-SOI process.

 Back

业务合作

广告发布

访问我们的广告选项

添加产品

供应商免费录入产品信息

© 2023 Design And Reuse

版权所有

本网站的任何部分未经Design&Reuse许可,
不得复制,重发, 转载或以其他方式使用。