The Arm Cordio-C50 is a Bluetooth 5 modem, a 802.15.4-2006 modem, protocol processing logic and link and MAC layer controller delivered as soft IP, with powerintent and implementation IP, associated test-benches and link layer and MAC firmware.

Arm Cordio-C50 radio IP is a complete self-contained radio sub-system supporting Bluetooth 5 and IEEE 802.15.4 protocols available at TSMC 55nm LP/ULP, TSMC 40nm LP/ULP, and UMC 55nm ULP process nodes. The solution consists of the RF 2.4GHz transceiver, modem, protocol processing logic and link and MAC controller along with link and MAC layer firmware.

The Arm Cordio-E154 is an 802.15.4-2006 modem, protocol processing logic and MAC layer controller delivered as soft IP, with power intent and implementation IP, associated test-benches and MAC firmware.

The Arm Cordio-E154 radio IP is a complete self-contained radio subsystem supporting the IEEE 802.15.4 protocol available at TSMC 55nm LP/ULP, TSMC 40nm LP/ULP and UMC 55nm ULP process nodes. The solution consists of the RF 2.4GHz transceiver, modem, protocol processing logic and MAC controller along with MAC layer firmware.

Arm Kigen provides a portfolio of Subscriber Identity Module (SIM) solutions built on the latest cellular standards and specifications.

Compliant with the Bluetooth 5, Bluetooth mesh, and IEEE 802.15.4 standards, Synopsys' DesignWare® Bluetooth® Low Energy Controller IP delivers secure wireless connectivity for Internet of Things (IoT) applications such as wearables, industrial, smart homes, and smart cities.

Synopsys' DesignWare® Controller IP for Bluetooth low energy, Thread, and Zigbee delivers secure, concurrent wireless connectivity for Internet of Things (IoT) applications such as wearables, industrial, smart homes, and smart cities.

Synopsys' DesignWare® Controller IP for Bluetooth low energy, Thread, and Zigbee delivers secure, concurrent wireless connectivity for Internet of Things (IoT) applications such as wearables, industrial, smart homes, and smart cities.

The LC SBC codec is targeted at Bluetooth applications, and is the only mandatory codec for applications that implement the Advanced Audio Distribution Profile (A2DP). The codec enables low-latency, C...

PentaG™ is industry’s first 5G NR IP platform capable of meeting the extreme performance, low latency and strict power budget requirements of 3GPP 5G UE solution for eMBB devices. It leverages CEVA’s unique expertise in DSP and modem architecture from working with world-leading wireless chip and OEM vendors.

CEVA s RivieraWaves Bluetooth 5 dual mode IP is a complete and flexible solution for integration into SoCs/ASSPs. It contains both classic BR/EDR Bluetooth and Bluetooth low energy and is compatible with all Bluetooth versions from Bluetooth 2.1+EDR up to Bluetooth 5 dual mode.

CEVA s RivieraWaves Bluetooth 5 low energy IP is a comprehensive and flexible solution for integration into SoCs/ASSPs.

CEVA s RivieraWaves Bluetooth 5.1 dual mode IP is a complete and flexible solution for integration into SoCs/ASSPs. It contains both classic BR/EDR Bluetooth and Bluetooth low energy and is compatible with all Bluetooth versions from Bluetooth 2.1+EDR up to Bluetooth 5.1 dual mode.

CEVA s RivieraWaves Bluetooth 5.1 low energy IP is a comprehensive and flexible solution for integration into SoCs/ASSPs.

CEVA offers the RivieraWaves, Bluetooth 4.2 dual mode RF IP, a Bluetooth 4.2 compliant RF IP for integration into SOCs/ASSPs and compatible with both classic BR/EDR Bluetooth and Bluetooth low energy specifications

The RivieraWaves Wi-Fi IP family offers a comprehensive suite of IPs and platforms for embedding Wi-Fi connectivity into SoCs/ASSPs addressing a broad range of applications.

The RivieraWaves Wi-Fi IP family offers a comprehensive suite of IPs and platforms for embedding Wi-Fi connectivity into SoCs/ASSPs addressing a broad range of applications.

The RivieraWaves Wi-Fi IP family offers a comprehensive suite of IPs and platforms for embedding Wi-Fi connectivity into SoCs/ASSPs addressing a broad range of applications.

The RivieraWaves Wi-Fi IP family offers a comprehensive suite of IPs and platforms for embedding Wi-Fi connectivity into SoCs/ASSPs addressing a broad range of applications.

The RivieraWaves Wi-Fi IP family offers a comprehensive suite of IPs and platforms for embedding Wi-Fi connectivity into SoCs/ASSPs addressing a broad range of applications.

The RivieraWaves Wi-Fi IP family offers a comprehensive suite of IPs and platforms for embedding Wi-Fi connectivity into SoCs/ASSPs addressing a broad range of applications.

From the dual or quad MAC Fusion F1 up to the super-high-performance 128-MAC ConnX B20, these Tensilica DSPs are designed for a broad range of applications that control sensors and antennas and process the data they handle.

Cadence provides a wide range of DSPs (digital signal processors) for Wireless Communication, Radar, SmartGrid applications as well as any application requiring digital signal or complex digital signal processing. Cadence Tensilica ConnX DSPs for Communication offer significant improvements in maximum frequency and algorithmic performance while reducing both silicon area and power consumption versus earlier generations of DSPs.

CPU IP Designed for the Next Generation of High Performance Wireless Communications and Networking

Ensigma Explorer Radio Processing Units (RPU) high performance communications platform enables the ultimate performance and flexibility for integrating communications into today highly complex SOC without compromise on power consumption or specification.

Ensigma provides low-power connectivity for Wi-Fi, Bluetooth and IEEE 802.15.4 without compromising performance, focusing on delivering industry leading Low-Power communications. For IoT, wearables an...

It is a highly flexible platform for low-power wireless standards such as Wi-Fi, Bluetooth and IEEE 802.15.4. Specifically designed to meet the communications requirements for the emerging low-power consumption markets such as the Internet of Things (IoT) and wearables, Whisper Series5 implements all of the connectivity requirements of tomorrow complex low-power SoCs.

BLE/802.15.4 System enables compact ultra-small form factor solutions with minimal external components to reduce the costs for large-scale production. Utilizing advanced design techniques and process ...

TC1750 is a high throughput turbo/convolutional code encoder covering LTE, HSPA+, WiMAX 16e/m. It performs either convolutional turbo code (CTC) encoding or convolutional code (CC) encoding and rate m...

TC1700 is a turbo decoder adressing LTE, LTE-A, WiMAX, HSPA/+, and legacy 3G standard. The core uses a unique architecture that reduces by more than 50 % the silicon area when compared to separate sin...

TC1720 is a high throughput and low latency Viterbi decoder optimized for WiFi and LTE applications.

TC1770 is a IoT-optimized turbo decoder Core compliant with LTE Cat-0 / Cat-M (release 12 and release 13). This Core incorporates LTE rate matching and an efficient HARQ combining algorithm thats make...

The ntG3_BBP is a fully compliant ITU-T G.9903 baseband modem that can be used in a wide range of smart grid applications over power lines

The spectrum sensing core blindly detects occupied sub-carriers within a wideband spectrum.The algorithm implemented in this core uses a patented algorithm (US 8,630,377 B2). The efficient real time implementation makes this core an idel candidate to be used in cognitive radios.

TC1000-WiMAX is the industry reference for fixed and mobile WiMAX turbo code (CTC). This solution has been adopted by several industry leaders for usage in both Base Station (FPGA Core) and User Termi...

C4200-WiMAX Core is a high speed Low Density Parity Check code (LDPC) decoder optimized for WiMAX (IEEE 802.16e) specifications. A patented decoding architecture allows meeting high throughputs within...

WiMAX Receiver Core is customizable and can be tailored to customer needs. This decoder is written in VHDL, capable of being used on any FPGA/ASIC architecture.

The 4.0 version of Bluetooth Core Specification, incorporates all of its previous features, adds a Low Energy Core Configuration, and sets the stage for a variety of new applications that need ultra-l...

The implementation of MiMo and Beamforming for 5G or other standards is a rather challenging task that, in addition to signal synchronization, requires the use of DSP-Cores with a range of processing power. VSORA meets the challenge.

The 5G-NR market is driving the processing power and flexibility requirements of the digital communications system to an entirely new level. Our MPU-801 single-core processor has been designed to fulfill these new requirements.