Bluetooth Low Energy v5.3 and IEEE 802.15.4 (ZigBee 3) compliant RF Transceiver + Modem IP silicon proven in 55 & 40nm ULP, FLASH process nodes.

The icyTRX ultra-low-power RF transceiver is designed to meet standards such as Bluetooth v5.3 Low Energy (Bluetooth Smart), 802.15.4 PHY Layer (e.g. ZigBee), and proprietary standards with data-rates...

BlueLitE is a Bluetooth core certified by BT SIG to meet the specifications version 5.3 (Bluetooth low energy) for single mode.

The Bluetooth low energy link layer provides the first level of control and data structure over the raw radio operations and bit stream transmission and reception.

70xx is a range of ultra‐low power LTE Cat M/NB-IoT RF Transceiver IPs optimized for IoT and M2M applications.

Multi-Standard, Low-Power IoT Radio

Bluetooth Low Energy (BLE) RF IP provides a transceiver designed for Bluetooth Smart applications. It is compliant with the BLE specification (part of Bluetooth 5.2, volume- 6) and supports GFSK modul...

RivieraWaves™ UWB is a low power ultra-wideband (UWB) MAC and PHY platform IP based on 802.15.4 HRP and the FiRa Consortium requirements.

The CEVA-XC12 is the first DSP architecture that offers the raw performance and power efficiency required for multi-gigabit class modems. This flexible architecture with multiple options enables it to be customized, configured, and scaled to address applications such as smartphones and other terminals, advanced and centralized access points, small cells, macro cells and cloud RAN (C-RAN).

The CEVA-XC4500 DSP vector processor is the fourth generation of the widely licensed CEVA-XC architecture. Optimized for advanced communication applications, and especially high-performance wireless infrastructure equipment, it features a combination of VLIW and vector engines that enhance typical DSP capabilities with advanced scalar and floating-point vector processing.

Based upon the industry�s most widely adopted CEVA-XC323 Vector DSP architecture, the CEVA-XC5 DSP vector processor offers the performance, area savings, and power efficiency that system designers demand when implementing a broad range of IoT and M2M communication standards.

CEVA's RivieraWaves Bluetooth 5.3 Low Energy IP is a comprehensive and flexible solution for integration into SoCs/ASSPs. The RW-BLE hardware baseband controller core (RW-BLE-BB), in charge of packe...

Ceva's RivieraWaves Bluetooth 5.4 Low Energy IP is a comprehensive and flexible solution for integration into SoCs/ASSPs.

ACTT’s Bluetooth Low Energy 5.2 Radio IP available from 55nm~22nm logic process node. The radio supports 1Mbps, 2Mbps and Long Range mode, which is fully compliant with Bluetooth® Low Energy Core Spec...

ACTT’s Bluetooth Low Energy 5.2 Radio IP available from 55nm~22nm logic process node. The radio supports 1Mbps, 2Mbps and Long Range mode, which is fully compliant with Bluetooth® Low Energy Core Spec...

ACTT’s Bluetooth Low Energy 5.2 Radio IP available from 55nm~22nm logic process node. The radio supports 1Mbps, 2Mbps and Long Range mode, which is fully compliant with Bluetooth® Low Energy Core Spec...

ACTT’s Bluetooth Low Energy 5.2 Radio IP available from 55nm~22nm logic process node. The radio supports 1Mbps, 2Mbps and Long Range mode, which is fully compliant with Bluetooth® Low Energy Core Spec...

Dual WideBand Frequency Synthesizer with Integrated VCO and Loop Filter. CorePLL is a versatile frequency synthesizer solution with ultra-low power, high performance and small size. Power consumption is only 18mA from 1.35V supply (24mW).

CoreVCO is a VCO chip consisting of two radiation hardened wideband SiGe VCOs (VCOPMOS and VCOBJT). Excellent phase noise performance in a wide frequency synthesis range and intrinsic radiation tolerance makes CoreVCO a trusted solution for demanding environments and applications, e.g. space applications and military communications.

TCAM can search for data that matches the input in one cycle from all the information stored in the memory.If there are multiple matching data, it is possible to find all of them.By adding a priority encoder (RTL), it is possible to select one from multiple matching data.

TCAM can search for data that matches the input in one cycle from all the information stored in the memory.

The icyTRX ultra-low-power RF transceiver is designed to meet standards such as Bluetooth Low Energy (Bluetooth Smart), 802.15.4 PHY Layer (e.g. ZigBee), and proprietary standards with data-rates from 62.5 kBit/s up to 4 Mbit/s.

mioty®, a miniaturized IoT system developed by Fraunhofer IIS, sets new standards in the field of wireless data transmission when it comes to cost efficiency, transmission range, transmission security and battery life.

Secure IoT IP Platform providing both ai-enabled sensor fusion and BLE 5.2 & 802.15.4 wireless connectivity. The modular platform is fully integrated to ensure portability to different embedded proces...

Secure IoT IP Platform with BLE 5.2 wireless connectivity and AI inference capability. Fully integrated for better portability to different embedded processors, including ARM and RISCV. The platform i...

IEEE 802.11ax is a Wireless Local Area Network standard in the IEEE 802.11 set of specifications. It is also labelled as Wi-Fi 6 by Wi-Fi Alliance. IEEE 802.11ax is designed to operate in the already ...

The EL2100 high performance low power 802.11 b/g/n 2.4GHz transceiver is designed for IoT applicationswith TSMC 40nm LP process technology.

BGM121 Blue Gecko Bluetooth SIP Module has +8 dBm TX power and is targeted for applications where ultra-small size, reliable high performance RF, low-power consumption and easy application development are key requirements. At 6.5 x 6.5 x 1.4 mm the BGM121 module fits applications where size is a constraint.

The Mighty Gecko family of SoCs is ideal for designing energy-friendly wireless connected IoT devices. Part of the Wireless Gecko portfolio, the Mighty Gecko is the superset part and supports 2.4 GHz and Sub-GHz protocols, including zigbee, Thread, BLE, and Silicon Labs Connect stack for 2.4 GHz, as well as Sub-GHz for proprietary protocols and the Connect stack. The single-die solution provides industry-leading energy efficiency, ultra-fast wakeup times, a scalable power amplifier, and no-compromise MCU features. The devices are well suited for battery operated application as well as other systems requiring high performance and low energy consumption.

H.264 High profile level 4.2 | Max resolution up to 2032x2032 | Max performance 1920x1088 30fps at 150Mhz (60fps at 300Mhz) | Macro block 16x16 / 8x8 / 4x4 all estimation | Intra prediction 0~8 all estimation | Wide motion search range (+-96, +-48) for moving camera | Quater pel motion estimation | CAVLC / CABAC VLC | Deblock filtering | Multi-slice encoding

The optical rainfall sensor uses the principle of optical induction to measure rainfall. A number of optical probes are built in and reliable telemetry algorithms are used to ensure reliable rainfall detection. Different from the traditional mechanical sensor, optical rainfall is smaller, more sensitive, more reliable, more intelligent, and easy to maintain.

The portable digital signal collector is a multi-interface data acquisition instrument which is developed by Huachang Science and Technology and integrates data acquisition, storage, analysis and customization. With the humanized interface and the operation interface, operation is simple and reliable. It has built-in mass memory, which can store more than 60000 pieces of data.

Our universal signal processing platform supports simultaneous multiple air interfaces, including WCDMA/HSDPA/LTE/WiMAX/CDMA2000 and GSM. MTI Mobile s radio Heads are available at high and low power levels to accommodate the needs of all mobile broadband network providers.

NBIOT55ULP from Rafael is a Narrowband IoT (NB-IoT) RF IP with Tx/Rx Radio for low-power wide area (LPWA) data link applications. It covers all frequency bands defined in 3GPP Releases 13 & 14. Design...

Complete silicon-proven IC product and IP solutions that can drop-in to your system or IC design and meet your time-to-market goals.

Power Quencher® LDOs: This series of low-power, fully-integrated low dropout (LDO) voltage regulators achieves a low-noise output voltage without external components, thus saving package pins and valuable PC board space.

The B-L475E-IOT01A Discovery kit for IoT node allows users to develop applications with direct connection to cloud servers.

SaberTek s 4th generation LTE transceiver IP. Supporting 3GPP Rel. 14, it has the lowest power consumption and silicon area, enabling IoT wireless market. This transceiver IP requires minimum off-chip components enabling very low cost IoT solutions.